Tape Measure Fractions Chart (Inches to Decimals & mm)

Free tape measure fractions chart: every sixteenth of an inch with its decimal and millimeter value, plus how to add, subtract and halve tape measurements.

A tape measure gives you fractions, but plans, cut lists, calculators and CNC tools often want decimals or millimeters. This page gives you every sixteenth of an inch in all three forms, plus simple methods for adding, subtracting and halving tape measurements without a calculator.

Every sixteenth inch line inside one inch labeled with its simplest fraction
Each line inside an inch, labeled in simplest form.

Tape measure fractions chart: sixteenths

Use the first column if you counted lines, the second for how the measurement is normally written, and the last two for conversions. Millimeter values are rounded to two decimal places. One inch equals exactly 25.4 mm.

Lines countedFractionDecimal inchMillimeters
1/161/160.06251.59
2/161/80.12503.18
3/163/160.18754.76
4/161/40.25006.35
5/165/160.31257.94
6/163/80.37509.53
7/167/160.437511.11
8/161/20.500012.70
9/169/160.562514.29
10/165/80.625015.88
11/1611/160.687517.46
12/163/40.750019.05
13/1613/160.812520.64
14/167/80.875022.23
15/1615/160.937523.81
16/1611.000025.40
How to use it with whole inchesAdd the whole inches to the decimal. 7 5/8 in = 7 + 0.625 = 7.625 in. For millimeters, multiply the total inches by 25.4: 7.625 × 25.4 = 193.68 mm.

Thirty-seconds (odd values)

Finer tapes and steel rules sometimes mark 1/32 inch. Even thirty-seconds simplify to sixteenths (for example 6/32 = 3/16), so only the odd values are listed here.

FractionDecimal inchMillimeters
1/320.031250.79
3/320.093752.38
5/320.156253.97
7/320.218755.56
9/320.281257.14
11/320.343758.73
13/320.4062510.32
15/320.4687511.91
17/320.5312513.49
19/320.5937515.08
21/320.6562516.67
23/320.7187518.26
25/320.7812519.84
27/320.8437521.43
29/320.9062523.02
31/320.9687524.61

How to simplify a tape fraction

Write the count over 16, then divide the top and bottom by 2 for as long as the top number stays even.

Adding two measurements

  1. Convert both fractions to sixteenths

    Example: 3 3/8 in + 2 5/16 in. 3/8 is 6/16, so you are adding 3 6/16 and 2 5/16.

  2. Add whole numbers and sixteenths separately

    3 + 2 = 5. 6 + 5 = 11 sixteenths. Result: 5 11/16 in.

  3. Carry over if you pass 16

    If the sixteenths add up to 16 or more, subtract 16 and add 1 to the whole inches. 4 12/16 + 1 9/16 = 5 21/16 = 6 5/16 in.

Subtracting a saw kerf or a measurement

Subtraction works the same way. If the top fraction is smaller, borrow 16 sixteenths from the whole inches. Example: 10 1/8 in − 3/16 in. 1/8 is 2/16, which is smaller than 3/16, so borrow: 10 2/16 becomes 9 18/16. Then 9 18/16 − 3/16 = 9 15/16 in.

This is useful when you need to take the thickness of a saw blade into account. Many common circular saw and table saw blades remove about 1/8 inch of material per cut, though thin-kerf blades remove less; check your blade’s specifications.

Finding the center of a board

To halve a measurement, halve the whole inches and the sixteenths separately. If the whole number is odd, turn the leftover inch into 16 sixteenths first.

Quick decimal-to-tape conversion

Going the other way — from a decimal on a plan to a line on your tape — multiply the decimal part by 16 and round to the nearest whole number. That is how many sixteenths to count.

For millimeters, divide by 25.4 to get inches first. 100 mm ÷ 25.4 = 3.937 in; 0.937 × 16 ≈ 15, so 100 mm is about 3 15/16 in.

Practice

Write 11/16 as a decimal

0.6875

2 7/8 in + 1 3/8 in

2 14/16 + 1 6/16 = 3 20/16 = 4 1/4 in

Center of a 46 5/8 in shelf

46 10/16 ÷ 2 = 23 5/16 in

How many sixteenths is 0.45 in?

0.45 × 16 = 7.2 → about 7/16 in

New to reading fractions on the blade itself? Start with the step-by-step guide, then come back here to convert.